[QuickTacBeta] QuickTacBeta Digest, Vol 12, Issue 1

[Peter Sullivan]

Dear Gusztav,

The spacing is controlled by the resolution you choose in Page Setup.  It is
computed automatically, so there is no way to change it other than to change
the resolution in Page Setup.  If we're not doing the best possible braille
spacing for the resolution you have chosen, then I'll need to explore things
in greater detail.

With any Enabling embosser, I recommend setting the Medium resolution
always, if you want to have good quality braille on the tactile diagram.

Best Regards,

Peter

-----Original Message-----
From: quicktacbeta-bounces at duxsys.com
[mailto:quicktacbeta-bounces at duxsys.com] On Behalf Of Gusztav Schay
Sent: Wednesday, June 04, 2008 4:44 PM
To: Smart, Heidi R.
Cc: quicktacbeta at duxsys.com
Subject: Re: [QuickTacBeta] QuickTacBeta Digest, Vol 12, Issue 1

Hi,
Thanks a lot!
That was the problem, somehow it did not change to 1key mode, even if
selected. I reinstalled it, now works fine.
One more thing though, is there a way to get the characters more condensed,
so it will not skip a cell after every letter?

all the best,
Gusztav.